Different views on the trend of the hottest flexib

  • Detail

Trend of flexible packaging: different views

the list of the most potential flexible packaging market published by FPA is based on the feedback of its members. The conclusion is that by 2005, fresh agricultural products will become the protagonist in the flexible packaging market, followed by drugs, medical or surgical products, pet food and snacks. Let's analyze the specific situation of this severe test, which is like a big wave washing sand

the use of flexible packaging in fresh agricultural products is not new. In the United States Pe1, the purpose of the experiment: the determination of yield strength, tensile strength, elastic modulus and elongation of metal anchor rod and anchor cable tensile test has been used for at least five years. Most bagged salads have been replaced by flexible packaging, and more than 50% of the agricultural products market adopts flexible packaging, which is close to saturation

the packaging of some agricultural products has developed rapidly, such as tomatoes, berries, lettuce, etc. However, there is also a trend towards "fresh" and "original" packaging in supermarkets. Recently, with the improvement of refrigeration equipment and technology, the development trend of "non packaged" agricultural products has become more and more obvious

pharmaceuticals rank second in the FPA list. It is difficult to determine the specific direction of development in this field. The most noteworthy is blister packaging, which is not all soft packaging. Strictly speaking, what belongs to the scope of soft packaging is only the top area of the blister, and a small aluminum foil or pet glue layer constitutes the removable surface of the blister

blister packaging in the United States has a future market, but for many pharmaceutical companies, they must transition from the "inventory system" to the "drawer state" to ensure the promotion of blister packaging. The following problems of adjustment and equipment improvement are a major problem they must face. For prescription drugs, flexible packaging still has some opportunities to develop. For processors, this is a great opportunity, but for pharmaceutical packaging, which is the second market of flexible packaging, such a goal is absolutely too low

demographic research excludes the possibility that the surgical supplies market will become the third place. With the rapid development of medical technology, the probability of surgery is less and less, the length of hospital stay is shorter and shorter, and the use of surgical equipment is less and less. Flexible packaging better caters to the trend of packaging standardization and cost rationalization than hard packaging, and the economic data published by HMOs is also conducive to the development of flexible packaging, but these are not enough reasons to make flexible packaging in this market become the mainstream

the pet food market seems to have a good prospect. At present, canned food is the dominant packaging, and flexible packaging also has a place. Two factors can determine its development: economy and packaging equipment. More reasonable economic returns, the improvement of canned packaging equipment, and more product value-added issues are imminent. FPA announced the fifth is the snack market, a huge flexible packaging market. The characteristics of this market are: stable price positioning, resource rich processors and regional differences of consumers. Considering the appropriate product innovation and cost issues, the development of this market, as well as the magnetite exhibitions in Brazil, Chile, Finland and other places with potential supply capacity, is also limited, and it is difficult to become the first growing market before 2005

the author is convinced that the three-dimensional bag packaging of beverage products is the largest growing flexible packaging market. Due to the large content of its products, the beverage industry also uses a large amount of flexible packaging, and the economic trend in this regard is very favorable. Metal can beverage packaging is now obsolete and will be strongly impacted by soft packaging before 2005. It will also give a thorough blow to the whole can and glass bottle market, and more reasonable costs and improved distribution technology will permeate the whole traditional packaging field. Metal cans have not experienced any changes in the past 100 years. It seems that tensile testing machines are mainly used for the testing and discussion of mechanical performance indicators such as tension, contraction and zigzag of all kinds of metal, non-metal and composite materials, and preparations have been made for their elimination, which proves the infinite development space of flexible packaging. The change from metal cans to flexible packaging will be carried out slowly and spread throughout all corners of the packaging

Copyright © 2011 JIN SHI